SAE J 1697 Recommended Practices for Design and Evaluation of Passenger and Light Truck Coolant Hose Clamped Joints standard by SAE International, 11/01/2003
SAE AS91711A Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Black Oxide, Steel, UNS G87400, 125 ksi min .3125-24 UNF-3A standard by SAE International, 10/30/2003
SAE AS91691A Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Black Oxide, Steel, UNS G87400, 125 ksi min .1900-32 UNF-3A standard by SAE International, 10/30/2003
SAE AS91701A Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Black Oxide, Steel, UNS G87400, 125 ksi min .2500-28 UNF-3A standard by SAE International, 10/30/2003
SAE AMS4089D Aluminum Alloy, Plate 1.6Cu - 2.2Mg - 0.22Cr - 5.7Zn (7475-T7651) Solution Heat Treated, Stress Relieved by Stretching, and Precipitation Heat Treated standard by SAE International, 10/23/2003
SAE J2638_200310 Fifth Wheel and Gooseneck Attachment Performance Up to 13 608/kg (30 000/lb) Trailer GVW standard by SAE International, 10/20/2003
SAE ARP5818 Design and Operation of Aircraft Refueling Tanker Vehicles standard by SAE International, 10/17/2003
SAE AS1614C Main Line Aircraft Towbar Attach Fitting Interface standard by SAE International, 10/14/2003
SAE ARP988A Electrohydraulic Mechanical Feedback Servoactuators standard by SAE International, 10/14/2003
SAE J1334_200310 Hydraulic Cylinder Integrity Test standard by SAE International, 10/13/2003
SAE J 2188 Commercial Truck and Bus SAE Recommended Procedure for Vehicle Performance Prediction and Charting standard by SAE International, 10/10/2003
SAE AMS5886B Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings, 50Ni 20Cr 20Co 5.8Mo 2.2Ti 0.45Al Consumable Electrode or Vacuum Induction Melted 2100°F (1149°C) Solution Heat Treated standard by SAE International, 10/03/2003