No products
SAE There are 12380 products.
-
SAE AMS4139H
SAE AMS4139H Aluminum Alloy, Forgings, 5.6zn 2.5mg 1.6cu 0.25cr standard by SAE International, 09/01/1996
$35.10 $78.00 -55%In Stock -
SAE AMS4145F
SAE AMS4145F Alumunim Alloy, Forgings, 12.2si 1.1mg 0.9cu 0.9ni standard by SAE International, 09/01/1996
$35.10 $78.00 -55%In Stock -
SAE AMS4171C
SAE AMS4171C Aluminum Alloy Extrusions, 4.3zn 3.3mg 0.60cu 0.20mn 0.18cr standard by SAE International, 09/01/1996
$35.10 $78.00 -55%In Stock -
SAE AMS4360E
SAE AMS4360E Magnesium Alloy Forgings, 8.5al 0.50zn standard by SAE International, 09/01/1996
$35.10 $78.00 -55%In Stock -
SAE AMS4386B
SAE AMS4386B Magnesium Alloy Sheet and Plate, 14li 1.25al standard by SAE International, 09/01/1996
$35.10 $78.00 -55%In Stock -
SAE AMS4397A
SAE AMS4397A Magnesium Wire, Welding 14li 1.25al standard by SAE International, 09/01/1996
$35.10 $78.00 -55%In Stock -
SAE AMS4665B
SAE AMS4665B Silicon Bronze Tubing, Seamless 96cu 3.2si, Annealed standard by SAE International, 09/01/1996
$35.10 $78.00 -55%In Stock -
SAE AIR1075A
SAE AIR1075A BAROMETRY FOR ALTIMETER CALIBRATION standard by SAE International, 09/01/1996
$35.10 $78.00 -55%In Stock -
SAE AMS2641A
SAE AMS2641A Vehicle, Magnetic Particle Inspection, Petroleum Base ( Reaffirmed: Feb 2007 ) standard by SAE International, 08/01/1996
$35.10 $78.00 -55%In Stock -
SAE MAM2204C
SAE MAM2204C Tolerances, Metric, Aluminum Alloy Standard Structural Shapes standard by SAE International, 08/01/1996
$35.10 $78.00 -55%In Stock -
SAE J 1648
SAE J 1648 Protective Coatings for Fasteners standard by SAE International, 08/01/1996
$35.10 $78.00 -55%In Stock -
SAE J 1053
SAE J 1053 Steel Stamped Nuts of One Pitch Thread Design~Inch Series standard by SAE International, 08/01/1996
$35.10 $78.00 -55%In Stock
