SAE J 1876 Plastic Dust Shield for Hydraulic Disc Brakes standard by SAE International, 05/01/2001
SAE AIR 5433 Lubricating Characteristics and Typical Properties of Lubricants Used in Aviation Propulsion and Drive Systems ( Reaffirmed: Nov 2005 ) standard by SAE International, 05/01/2001
SAE AMS5603E Sheet and Strip 15cr 8.4ni 2.2mo 1.1al Vacuum Induction Melted, Solution Heat Treated standard by SAE International, 05/01/2001
SAE AMS5693C Steel, Corrosion Resistant, Wire 18cr 9.0ni Cryogenically Produced, High Tensile Strength standard by SAE International, 05/01/2001
SAE AMS5783F Steel Welding Electrodes, Covered, Corrosion and Heat Resistant, 19.5cr 8.8ni 0.50mo 1.5w 1.0cb standard by SAE International, 05/01/2001
SAE AMS5806C Alloy Welding Wire, Corrosion and Heat Resistant, Low Expansion, 42Fe - 38Ni - 15Co - 3.0 (Cb + Ta) - 1.4Ti - 0.92Al, Vacuum Melted standard by SAE International, 05/01/2001
SAE AMS7238B Alloy Pm Shapes, Corrosion, Wear, and Heat Resistant 56co 30cr 8.25w (1.10-1.90c) standard by SAE International, 05/01/2001
SAE AMS7239B Alloy Pm Shapes, Corrosion, Wear, and Heat Resistant 60co 29cr 4.5w (0.90-1.40c) standard by SAE International, 05/01/2001
SAE AMS4510G Phosphor Bronze, Sheet, Strip, and Plate, 94.5Cu - 4.0Sn - 0.19P, Spring Temper (H08) standard by SAE International, 05/01/2001
SAE AMS3054B Oil, Lubricating, Low Temperature for -55 °C (-67 °F) Service standard by SAE International, 05/01/2001
SAE AMS-G-81937 Grease, Instrument, Ultra-Clean, Metric standard by SAE International, 05/01/2001
SAE AMS-G-81827 Grease, Aircraft, High Load Capacity, Wide Temperature Range standard by SAE International, 05/01/2001