SAE J772_200407 Clearance Envelopes for Six-Bolt, Eight-Bolt, and Rear Truck Transmission Mounted Power Takeoffs standard by SAE International, 07/23/2004
SAE AMS5934 Steel, Extra High Toughness, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions, 13Cr - 8.0Ni - 2.2Mo - 1.1Al, Vacuum Induction Plus Consumable Electrode Melted, Solution Heat Treated, Precipitation-Hardenable standard by SAE International, 07/22/2004
SAE AMS4298 Aluminum Alloy, Alclad Sheet, 3.8Cu - 1.0Mg - 0.3Mn - 0.60Zn (Alclad 2056-T3) Solution Heat Treated and Cold Worked standard by SAE International, 07/22/2004
SAE AIR 5892A Nonvolatile Exhaust Particle Measurement Techniques standard by SAE International, 07/22/2004
SAE AMS3267B Sealing Compound, Low Adhesion, Corrosion Inhibiting, for Removable Panels and Fuel Tank Inspection Plates standard by SAE International, 07/22/2004
SAE AS5609 Aircraft/Store Common Interface Control Document Format Standard standard by SAE International, 07/22/2004
SAE ARP 1533A Procedure for the Analysis and Evaluation of Gaseous Emissions from Aircraft Engines standard by SAE International, 07/20/2004
SAE AS28912B Bearing, Roller, Self-Aligning, Single Row Airframe, Anti-Friction, Sealed, Type I standard by SAE International, 07/19/2004
SAE AS21446A Bearing, Roller, Self-Aligning Single Row, Barrel Roller, Torque Tube, Airframe, Antifriction, Sealed Type V standard by SAE International, 07/19/2004
SAE J 1436 Requirements for Engine Cooling System Filling, Deaeration and Drawdown Tests standard by SAE International, 07/13/2004
SAE AMS5662M Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings 52.5Ni 19Cr 3.0Mo 5.1Cb 0.90Ti 0.50Al 18Fe, Consumable Electrode or Vacuum Induction Melted 1775°F (968°C) Solution Heat Treated, Precipitation Hardenable standard by SAE International, 07/12/2004
SAE AMS5663M Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1775 °F (968 °C) Solution and Precipitation Heat Treated standard by SAE International, 07/12/2004