SAE AS81934/2A BEARING, SLEEVE, FLANGED, SELF-LUBRICATING, â65 °F TO 325 °F standard by SAE International, 11/24/2004
SAE AMS4418G Magnesium Alloy, Sand Castings, 2.5Ag 2.1Di 0.70Zr (QE22A-T6), Solution and Precipitation Heat Treated standard by SAE International, 11/24/2004
SAE J277_200411 Maintenance of Design Voltage-Snowmobile Electrical Systems standard by SAE International, 11/22/2004
SAE J1842_200411 Disc Wheel Hub/Spoke Wheel and Axle Interface Dimensions--Commercial Vehicles standard by SAE International, 11/22/2004
SAE AS4492 Survivor Locator Lights standard by SAE International, 11/18/2004
SAE AS83413/8A Connectors and Assemblies, Electrical, Aircraft Grounding: Type Iv Jumper Cable Assembly, Lead, Electrical standard by SAE International, 11/17/2004
SAE AMS5377F Nickel Alloy, Corrosion and Heat Resistant, Investment Castings 73ni 12cr 4.5mo 2.0cb 0.70ti 0.05c 6.0al 0.010b 0.10zr, Vacuum Cast, as Cast standard by SAE International, 11/17/2004
SAE J 1737 Test Procedure to Determine the Hydrocarbon Losses from Fuel Tubes, Hoses, Fittings, and Fuel Line Assemblies by Recirculation standard by SAE International, 11/17/2004
SAE AMS4186C Aluminum Alloy, Bars, Rods, and Wire, Rolled or Cold Finished, 5.6Zn 2.5Mg 1.6Cu 0.23Cr, As Fabricated standard by SAE International, 11/16/2004
SAE J 1393 Heavy Duty Vehicle Cooling Test Code R standard by SAE International, 11/11/2004
SAE AS13441A Test Methods for Electrical Connectors standard by SAE International, 11/11/2004
SAE J2409_200411 Strain-Life Fatigue Data File Format standard by SAE International, 11/04/2004