No products
SAE There are 12380 products.
-
SAE J1884_200502
SAE J1884_200502 Vehicle Jack Requirements and Test Procedure standard by SAE International, 02/04/2005
$35.10 $78.00 -55%In Stock -
SAE J1698_200502
SAE J1698_200502 Vehicle Event Data Interface-Vehicular Output Data Definition standard by SAE International, 02/04/2005
$35.10 $78.00 -55%In Stock -
SAE J328_200502
SAE J328_200502 Wheels--Passenger Car and Light Truck Performance Requirements and Test Procedures standard by SAE International, 02/02/2005
$35.10 $78.00 -55%In Stock -
SAE AS81934A
SAE AS81934A Bearings, Sleeve, Plain and Flanged, Self-Lubricating standard by SAE International, 02/02/2005
$35.10 $78.00 -55%In Stock -
SAE AS8049B
SAE AS8049B Performance Standard for Seats in Civil Rotorcraft, Transport Aircraft, and General Aviation Aircraft standard by SAE International, 01/25/2005
$35.10 $78.00 -55%In Stock -
SAE AMS5391F
SAE AMS5391F Nickel Alloy, Corrosion and Heat Resistant, Investment Castings, 73ni 13cr 4.5mo 2.3cb 0.75ti 6.0al 0.010b 0.10zr Vacuum Cast, As-Cast standard by SAE International, 01/24/2005
$35.10 $78.00 -55%In Stock -
SAE AMS5396D
SAE AMS5396D Nickel Alloy, Corrosion and Heat Resistant, Investment Castings 65ni 28mo 5.5fe 0.4v (N-12mv) As-Cast standard by SAE International, 01/24/2005
$35.10 $78.00 -55%In Stock -
SAE AMS4167H
SAE AMS4167H Aluminum Alloy, Extrusions, 5.6Zn 2.5Mg 1.6Cu 0.23Cr (7075-T73511) Solution Heat Treated, Stress Relieved by Stretching, and Overaged standard by SAE International, 01/24/2005
$35.10 $78.00 -55%In Stock -
SAE AMS5390E
SAE AMS5390E Nickel Alloy, Corrosion and Heat Resistant, Investment Castings, 47.5ni 22cr 1.5co 9mo 0.6w 18.5fe (N-12mv) As-Cast standard by SAE International, 01/24/2005
$35.10 $78.00 -55%In Stock -
SAE AS25281A
SAE AS25281A Clamp, Loop, Plastic, Wire Support standard by SAE International, 01/21/2005
$35.10 $78.00 -55%In Stock -
SAE AS4859A
SAE AS4859A Fitting, Coupling, Pipe, Internal Thread standard by SAE International, 01/20/2005
$35.10 $78.00 -55%In Stock -
SAE AS5406C
SAE AS5406C Fitting, Union, Tube, .375 Bulkhead standard by SAE International, 01/20/2005
$35.10 $78.00 -55%In Stock
