National Electrical Safety Code...
SAE J 1113-27 Electromagnetic Compatibility Measurements Procedure for Vehicle Components - Part 27 - Immunity to Radiated Electromagnetic Fields~Mode Stir Reverberation Method standard by SAE International, 09/27/2005
SAE AMS6521C Steel Sheet, Strip, and Plate, Maraging, 18.5Ni - 9.0Co - 4.9Mo - 0.65Ti - 0.10Al, Consumable Electrode Melted, Solution Heat Treated standard by SAE International, 09/22/2005
SAE AMS6432C Steel Bars, Forgings, and Tubing, 1.05Cr - 0.55Ni - 1.0Mo - 0.12V (0.43 - 0.49C) standard by SAE International, 09/22/2005
SAE AMS3216G Fluorocarbon (FKM) Rubber High-Temperature - Fluid Resistant Low Compression Set 70 to 80 standard by SAE International, 09/22/2005
SAE AMS3218C Fluorocarbon (FKM) Rubber High-Temperature-Fluid Resistant Low Compression Set 85 to 95 standard by SAE International, 09/22/2005
SAE AMS5045H Steel, Sheet and Strip, 0.25 Carbon, Maximum, Hard Temper standard by SAE International, 09/22/2005
SAE AMS6346A Steel Bars, 0.95Cr - 0.20Mo - (0.28 to 0.33C) (SAE 4130), Hardened and Tempered, 125 Ksi (862 MPa) Tensile Strength standard by SAE International, 09/22/2005
SAE AMS6443G Steel Bars, Forgings, and Tubing, 1.0Cr (0.98 - 1.10C) (SAE 51100), Consumable Electrode Vacuum Melted standard by SAE International, 09/22/2005
SAE AMSR83248A Rubber, Fluorocarbon Elastomer, High Temperature, Fluid, and Compression Set Resistant standard by SAE International, 09/22/2005
SAE AS7109/4A Nadcap Requirements for Stripping of Coated Material standard by SAE International, 09/21/2005
SAE AS7109/6A Nadcap Requirements for Plating of Coated Parts standard by SAE International, 09/21/2005
SAE AS7109/7A Nadcap Requirements for Heat Treating for Suppliers of Coatings standard by SAE International, 09/21/2005