SAE J 1621 Engine Retarder Dynamometer Test and Capability Rating procedure standard by SAE International, 12/01/2005
SAE HEB1A Human Engineering - Principles and Practices standard by SAE International, 12/01/2005
SAE J 2283 Mechanical and Material Requirements for One Piece Wheel Nuts standard by SAE International, 11/29/2005
SAE ARP5628 Final Approach Spacing System (FASS) standard by SAE International, 11/28/2005
SAE AMS6322N Steel Bars, Forgings, and Rings, 0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740) standard by SAE International, 11/23/2005
SAE AMS6451C Steel, Spring Wire, 1.4Si - 0.65Cr (0.51 - 0.59C) (SAE 9254) Oil Tempered standard by SAE International, 11/23/2005
SAE AMS6448K Steel Bars, Forgings, and Tubing, 0.95Cr - 0.22V (0.48 - 0.53C) (SAE 6150) standard by SAE International, 11/23/2005
SAE J 2223-1 Connections for On-Board Road Vehicle Electrical Wiring Harnesses~Part 1: Single-Pole Connectors~Flat BladeTerminals~Dimensional Characteristics and Specific Requirements standard by SAE International, 11/15/2005
SAE J 1405 Optional Impulse Test Procedures for Hydraulic Hose Assemblies standard by SAE International, 11/02/2005
SAE AS24464A BEARING, ROLLER, NEEDLE-DOUBLE ROW, HEAVY DUTY, SELF-ALIGNING, TYPE IV, ANTIFRICTION, INCH standard by SAE International, 11/01/2005
SAE ARP4732 Cover Shipping Flexible (Nonreuseable) standard by SAE International, 10/28/2005
SAE ARP4166 Cover, Shipping and Storage (Flexible, Reusable, Water-Vaporproof) standard by SAE International, 10/28/2005