SAE AMS5034A Steel, Welding Wire, 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) standard by SAE International, 05/17/2006
SAE AMS6373G Steel, Welded Tubing, 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) standard by SAE International, 05/17/2006
SAE AMS5580K Nickel Alloy, Corrosion and Heat-Resistant, Seamless Tubing 74Ni - 15.5Cr - 8.0Fe, Annealed standard by SAE International, 05/17/2006
SAE AMS6375C Steel, Welding Wire, 0.50Cr - 0.55Ni - 0.20Mo (0.18 - 0.23C) (SAE 8620), Vacuum Melted, Environment Controlled Packaging standard by SAE International, 05/17/2006
SAE AMS5866D Steel, Corrosion-Resistant, Flat Wire 18Cr - 9.0Ni (SAE 30302) Spring Temper standard by SAE International, 05/17/2006
SAE AMS4187C Bars and Rods, Rolled, Drawn, or Cold Finished, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr, Annealed standard by SAE International, 05/17/2006
SAE ARP4895A Flight Control Actuators - Dynamic Seals, Collection of Duty Cycle Data standard by SAE International, 05/17/2006
SAE AMS7903B Beryllium Bars, Rods, Tubing, and Shapes, 4.25Be0 - 94Be, High Micro-Yield Strength standard by SAE International, 05/17/2006
SAE AMS5739E Steel, Corrosion and Moderate Heat Resistant, Bars, Forgings, and Rings, 14.5Cr - 6.5Ni - 0.72Ti, Solution Heat Treated and Maraged, 180,000 psi (1240 MPa) Tensile Strength standard by SAE International, 05/15/2006
SAE AMS5740E Steel, Corrosion and Moderate Heat Resistant, Bars, Forgings, and Rings, 14.5Cr - 6.5Ni - 0.72Ti, Solution Heat Treated and Maraged, 155,000 psi (1070 MPa) Tensile Strength standard by SAE International, 05/15/2006
SAE AMS5882D Nickel Alloy, Corrosion and Heat Resistant, Forgings, 55Ni - 15Cr - 17Co - 5.0Mo - 3.5Ti - 4.0Al - 0.025B, Solution, Stabilization, and Precipitation Heat Treated, Powder-Metallurgy Product standard by SAE International, 05/15/2006
SAE AMST9047A Titanium and Titanium Alloy, Bars (Rolled or Forged) and Reforging Stock, Aircraft Quality standard by SAE International, 05/15/2006