No products
SAE There are 12380 products.
-
SAE AS85720B
SAE AS85720B Fittings, Tube, Fluid Systems, Separable, High Pressure Beam Seal, 5000/8000 psi, General Specification For standard by SAE International, 03/04/2018
$35.10 $78.00 -55%In Stock -
SAE MA3376C
SAE MA3376C Bolts & Screws, UNS G87400 Tensile Strength 860 MPa & 1000 MPa Procurement Specification, Metric (Stabilized: Mar 2018) standard by SAE International, 03/04/2018
$35.10 $78.00 -55%In Stock -
SAE AIR1471B
SAE AIR1471B Torque Tightening Threaded Fasteners (Stabilized: Mar 2018) standard by SAE International, 03/04/2018
$35.10 $78.00 -55%In Stock -
SAE AMS2451/2B
SAE AMS2451/2B Plating, Brush, Nickel Low Stress, Hard Deposit standard by SAE International, 03/04/2018
$35.10 $78.00 -55%In Stock -
SAE AMS4107G
SAE AMS4107G Aluminum Alloy Die Forgings (7050-T74) Solution Heat Treated and Overaged standard by SAE International, 03/04/2018
$35.10 $78.00 -55%In Stock -
SAE AMS4123J
SAE AMS4123J Aluminum Alloy, Rolled or Cold Finished Bars and Rods (7075-T651) Solution and Precipitation Heat Treated standard by SAE International, 03/04/2018
$35.10 $78.00 -55%In Stock -
SAE AMS4217J
SAE AMS4217J Aluminum Alloy, Castings 7.0Si - 0.32Mg (356.0-T6) Solution and Precipitation Heat Treated standard by SAE International, 03/04/2018
$35.10 $78.00 -55%In Stock -
SAE AMS4225E
SAE AMS4225E Aluminum Alloy, Heat-Resistant, Castings 5.0Cu - 1.5Ni - 0.25Mn - 0.25Sb - 0.25Co - 0.20Ti - 0.20Zr (203.0-T6) Solution Heat Treated and Precipitation Heat Treated standard by SAE International, 03/04/2018
$35.10 $78.00 -55%In Stock -
SAE AMS4255C
SAE AMS4255C Aluminum Alloy, Clad One Side Sheet 0.6Mg - 0.35Si - 0.28Cu (No. 21 Brazing Sheet) As Fabricated standard by SAE International, 03/04/2018
$35.10 $78.00 -55%In Stock -
SAE AMS4340F
SAE AMS4340F Aluminum Alloy, Extrusions 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T76511) Solution Heat Treated, Stress Relieved, Straightened, and Overaged standard by SAE International, 03/04/2018
$35.10 $78.00 -55%In Stock -
SAE AMS4341F
SAE AMS4341F Aluminum Alloy, Extrusions 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T73511) Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Overaged standard by SAE International, 03/04/2018
$35.10 $78.00 -55%In Stock -
SAE AMS4343E
SAE AMS4343E Aluminum Alloy, Extrusions 7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr (7149-T73511) Solution Heat Treated, Stress Relieved by Stretching, and Overaged standard by SAE International, 03/04/2018
$35.10 $78.00 -55%In Stock
